Table of Contents
You can track stablecoin supply yourself with three public sources: a dashboard such as DefiLlama's stablecoins page, the issuer's own attestation or transparency report, and the mint and burn activity on the token's chain. On 16 November 2026 a DefiLlama API pull showed about $287.5 billion in USD-pegged circulating supply, with USDT at $175.3 billion and USDC at $69.3 billion (DefiLlama). That is the working total this guide uses. Our weekly stablecoin supply snapshot for 16 November 2026 reported $288.87 billion for the same date. The two figures sit close together; they can differ by pull time and by which tokens the dashboard includes.
This is a method guide, not a ranked list of the largest coins and not a peg-watch. For market-cap rankings see largest stablecoins in 2026. For price deviation, see how to monitor a stablecoin peg. For why supply can fall quickly, start with our recent 30-day supply-drop analysis, then come back here to rebuild the numbers yourself.
Key Takeaways
- A 16 November 2026 DefiLlama pull showed about $287.5 billion in USD-pegged circulating supply, led by USDT at $175.3 billion and USDC at $69.3 billion (DefiLlama).
- Our weekly snapshot for the same date reported $288.87 billion. Treat dashboard totals as dated pulls, not a single official number.
- Circle's transparency page, checked on 16 November 2026, says USDC reserves are disclosed weekly and showed a reserve-composition date of 12 November 2026 (Circle Transparency).
- Tether says circulation metrics are typically published daily and that tokens are fully reserved (Tether Transparency). Read those pages alongside the dashboard, not instead of it.
- A supply drop only means something once you can see whether tokens were burned, moved, or merely re-labelled. Our 30-day supply-drop analysis is the recent example; this page is the method for repeating the check.
Why supply figures disagree
Stablecoin supply is not one on-chain integer. Dashboards sum circulating amounts across issuers and chains, sometimes including only USD-pegged tokens, sometimes every peg. Issuers report coins they consider outstanding, which can exclude tokens they have not yet sold or have already redeemed. Explorers show the token's total supply on one chain, which will not match a multi-chain total.
When two numbers disagree, check four things before you assume one is wrong: the date and time of the pull, whether the figure is circulating or total, whether non-USD pegs are included, and whether the source is a dashboard, an attestation, or a single-chain explorer. Then keep the source next to the number.
How to pull supply from DefiLlama
DefiLlama's public stablecoins dashboard is the fastest way to get a dated, comparable total. The steps below are the ones used for the 16 November 2026 figures in this guide.
Step 1: open the stablecoins dashboard
Go to defillama.com/stablecoins. The page lists circulating supply by token, by chain and by issuer. Note the page date, or the time of your own API pull if you use https://stablecoins.llama.fi/stablecoins directly.
Step 2: record the USD-pegged total and the top coins
Filter to USD-pegged assets if you want a dollar-supply figure rather than a mixed-currency total. Write down the grand total and the two or three largest coins. On 16 November 2026 that was about $287.5 billion in USD-pegged circulating supply, with USDT at $175.3 billion and USDC at $69.3 billion (DefiLlama). Keep the raw numbers with the date. Do not round away a move you later want to explain.
Step 3: compare with the previous week or month
A single total is a snapshot. The useful question is what changed. DefiLlama's charts show the path over 7, 30 or 90 days. Our weekly supply snapshot for 16 November 2026 is the series post for this week; our 30-day supply-drop article is the recent example of a fast contraction. If your own pull disagrees with a published snapshot, keep both dates and both URLs rather than forcing them to match.
Step 4: break the total down by chain if you need it
The same dashboard can split a coin's circulating supply across Ethereum, Tron, Solana and other networks. Use that view when you want to know where tokens actually sit, not only who issued them. A chain-level figure is also the one you can later match to an explorer.
| Source, 16 November 2026 | What it measures | USD-pegged figure |
|---|---|---|
| DefiLlama stablecoins (API pull this date) | Circulating USD-pegged supply across listed issuers | About $287.5 billion |
| USDT, same pull | Tether circulating, per DefiLlama | $175.3 billion |
| USDC, same pull | Circle USDC circulating, per DefiLlama | $69.3 billion |
| Weekly supply snapshot, 16 November 2026 | This site's weekly series total for the same date | $288.87 billion |
Figures in the DefiLlama rows are from a 16 November 2026 API pull of the official stablecoins endpoint (DefiLlama). The snapshot row is this site's weekly series total for the same calendar date (weekly snapshot). The $1.4 billion gap between those two dated totals is a reminder to date every pull.
How to use issuer attestations as a supply check
A dashboard tells you what the market is counting. An attestation or transparency report tells you what the issuer says is outstanding, and what reserve assets it claims sit against that amount. This section is only the supply check. For how to read an attestation line by line, use how to read a stablecoin attestation. For how reserves, attestations and audits differ, see how stablecoins are backed.
On 16 November 2026, Circle's transparency page stated that USDC and EURC are redeemable 1:1, that USDC reserve holdings are disclosed weekly, and that the on-page reserve composition was dated 12 November 2026. It also points to monthly third-party assurance reports under AICPA attestation standards. Record the composition date and the report date separately; they are not always the same day.
The same day's check of Tether's transparency page stated that Tether tokens are pegged 1:1, that they are fully reserved, and that circulation metrics are typically published daily. The public page is a starting point; Tether also publishes reserve reports on a longer cycle. For a recent worked example of reading one of those reports, see Tether's Q3 2026 attestation.
When you use an attestation as a supply check, write down four fields: the report date, the outstanding or in-circulation figure the issuer reports, the reserve total, and whether the accountant's opinion is an examination, a review, or a weaker agreed-upon procedures letter. Then compare the outstanding figure with the same day's DefiLlama row. A gap is a question, not automatically an error.
How to watch mint and burn on-chain
Dashboards and attestations can lag. The chain is where tokens are actually created and destroyed. You do not need a custom indexer to do a basic check.
USDC on Ethereum
Open the official USDC token page on Etherscan, 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48, which is the Ethereum address published on Circle's USDC contract list as of 16 November 2026. The token page shows total supply on that chain and a transfer list. Large mints and burns appear as transfers from or to the known supply-controller addresses. This is the Ethereum figure only. USDC also exists on other chains, including Base, Arbitrum and Solana, each with its own official address or mint on the same Circle list.
USDT and other issuers
Repeat the same pattern on the official contract the issuer publishes for that chain, not a lookalike ticker. Tron remains a large USDT venue, so an Ethereum-only explorer view will understate Tether's total. Match the chain in the dashboard breakdown to the explorer you open.
What a mint or burn is telling you
A mint increases circulating supply when the issuer issues new tokens, usually against a corresponding reserve inflow. A burn decreases circulating supply when tokens are redeemed. Treasury moves and intra-issuer transfers can look large without changing the economic total. If a dashboard shows a sudden drop, look for burns, redemptions, or a change in what the dashboard includes, and only then reach for a market-stress story. The recent 30-day supply drop is the case study; the explorer check is how you test a new move.
A weekly habit that stays current
A workable routine is once a week, on the same weekday: pull DefiLlama, save the USD-pegged total and the USDT and USDC rows, open Circle and Tether transparency pages and note the latest composition or circulation date, and scan the official USDC (and, if you track it, USDT) token page for outsized mints or burns. Compare the new total with last week's. If the move is large, read it against the latest weekly supply snapshot and, when the contraction is sharp, against the supply-drop analysis.
What this page is not
It is not a substitute for the largest-stablecoins ranking, which is about who is biggest and why. It is not a peg-monitoring how-to, which is about price deviation rather than outstanding supply. And it is not a full attestation-reading guide; that work already lives at how to read a stablecoin attestation. Use this page when you want to rebuild a supply figure and keep it dated.
Conclusion
Tracking stablecoin supply is a three-source habit: a dated dashboard pull, the issuer's latest transparency or attestation page, and a quick look at official mint and burn activity on-chain. On 16 November 2026 the DefiLlama pull used here showed about $287.5 billion in USD-pegged circulating supply. Pair that method with the latest weekly stablecoin supply snapshot and, when you need the story behind a contraction, with the 30-day supply-drop analysis. Write the date next to every number. The figure is only as good as the pull.
FAQ
How often should I refresh a stablecoin supply figure?
Weekly is enough for most research and reporting. Use a same-day pull when you are writing about a move, and always keep the date and the URL next to the number.
Why did DefiLlama and the weekly snapshot disagree on 16 November 2026?
A DefiLlama API pull on 16 November 2026 showed about $287.5 billion in USD-pegged circulating supply. The weekly snapshot for the same date reported $288.87 billion. Pull time, included tokens and rounding can move the total by more than a billion dollars. Keep both sources, dated.
Is an issuer attestation better than DefiLlama?
They answer different questions. The dashboard is a comparable, frequently updated market total. The attestation is the issuer's stated outstanding amount and reserve backing, with an accountant's report on a slower cycle. Use both, and see how to read a stablecoin attestation.
Can I track mint and burn without running a node?
Yes. Official token pages on a public explorer, such as the Ethereum USDC contract on Etherscan, show supply and large mints or burns. Match the contract to the issuer's published list first.
Does a falling supply figure always mean people are selling?
No. Tokens can be redeemed and burned, moved between chains, or dropped from a dashboard's universe. Confirm burns and redemptions on-chain and in the issuer's reporting before you treat a drop as outflows. The recent 30-day supply drop is the worked example.
Where should I go for rankings or peg risk?
For the largest coins by market cap, use largest stablecoins in 2026. For price deviation, use how to monitor a stablecoin peg. This page stays on how to track supply.
This guide is for information only. It is not investment, legal, tax or accounting advice. Dashboard totals, attestation figures and on-chain supply can change during the day; check the live source before you rely on a number.